I have an open trailer for sale. Asking $2,200.
Custom made for a Spec Racer Ford by another SRF racer in the early 2000's. I bought it in early 2007.
Steel frame (hot dip galvanized when built)
Total length: 18' 4"
Load width: 70"
Load length, excluding tire rack: 12' 11"
Ramp angle with trailer level: 11 degrees
New bearings and races in January 2021, barely used since then
Electric, self-adjusting brakes
E-Z Lube hubs
Empty weight: 1,036 lbs
Fully loaded: 2,883 lbs (Axle weight: 2,558 lbs Tongue weight: 325 lbs)
2" hitch ball receiver
Tire rack can hold 2 sets of SRF tires
Some damage to upper frame on the left side. I didn't see what happened, but it looked like someone had backed into the side of the trailer. Lower most rail wasn't bent, but upper diagonal rails were bent inwards. Repaired by straightening the bent upper diagonal rails, bolting on metal reinforcing strips, and then welding. I've used the trailer multiple times afterwards with no issues.
Tires Karrier Load Star Radial 175-80 x 13. Tires on axle have manufacture date of 23rd week of 2016. Tread depth 15/64". Spare tire has a date of manufacture of 33rd week of 2011. Tread depth 8/32".
Wheels: Steel 13" wheels with "5 on 4-1/2" bolt pattern
Hand dolly included
Stored in covered storage facility with axle on jack stands and tires off the ground
Trailer located in Friendswood Texas (South side of Houston)
Registered in Texas as a "homebuilt" trailer. No VIN. No title exists nor was one required to register it in Texas.
Pictures at: https://photos.app.goo.gl/HwaDVdnV2nvQkUaN9
Ed Cavalier
EJC-SpecRacer@outlook.com
Open Trailer for Sale (Houston TX Area)
1 post
• Page 1 of 1
| Quote |
1 post
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest

