Trailers and fitting a UTV/Cart. Ideas requested

Getting to the track and back, where you stay while you are there.

Forum Hermit
Forum Hermit
Posts: 127
Joined: Thu May 30, 2013 6:36 am

Chassis:
577
PostPosted: Sun Oct 26, 2014 4:55 pm
I am looking to fit a UTV or Golf Cart in my trailer with the race car. I only have 80" to spare. Most UTV and carts need 84-90+.

Alone seen or dealt with this situation? I figure I will have to jack one end up a foot and build a stand, so the nose of the srf will fit underneath.

I wondered if anyone had a more ingenious solution....
Scott Cypher
SRF3 #577 G3
User avatar
Needs a Life!!!
Needs a Life!!!
Posts: 767
Joined: Wed Nov 30, 2011 12:21 am

Chassis:
595
PostPosted: Tue Oct 28, 2014 9:41 pm
put it sideways...
Bob Breton - SRF 51 - San Francisco Region

Forum Hermit
Forum Hermit
Posts: 136
Joined: Thu Dec 01, 2011 4:45 pm
Location: Oregon
Chassis:
404
PostPosted: Wed Oct 29, 2014 11:26 pm
Scott,

Todd Butler has/had a trailer which he made a winch system with ramps. His 24'/27' trailer could carry 2 SRF's.
Another idea I have seen is to make ramps on each side and then use a winch to pull your SRF up the ramps far enough to clear the golf cart. I saw that idea when we were racing stock cars.
We have a 27' trailer with a work bench at the front. We are still able load the golf cart nose in forward facing and back in the SRF, leaving us about 6-8" to spare.
Oh I have several additional ideas on how to raise the SRF but I am sure you have talked with others and now which plan works best for you. Have Fun

Return to Towing and Trailers

Who is online

Users browsing this forum: No registered users and 10 guests


cron