GEN3 Engine Swap Procedure

Check out the latest version of the Spec Racer! LBoth ligher weight and more powerful!!! Available soon, racing in 2015!
User avatar
Novice Typer
Novice Typer
Posts: 20
Joined: Sun Jul 06, 2014 11:14 pm
Location: Los Gatos, California
Chassis:
065
PostPosted: Fri Jan 12, 2018 4:03 am
We just added engine removal and installation procedures to our Website. There are procedures for both GEN2's and GEN3's. The procedures include a detailed process and a simple listing of the process steps. Feel free to give us input or make recommendations if you have any. Click on the link below to get you to the .pdf document.

https://bruce-richardson-qu6e.squarespa ... nfig/pages

Bruce @ www.accelracetek.com
User avatar
Needs a Life!!!
Needs a Life!!!
Posts: 294
Joined: Thu Feb 23, 2012 3:35 pm
Location: Ohio
Chassis:
244
PostPosted: Fri Jan 12, 2018 3:11 pm
Nice revision Bruce! Especially the added pics, generous labels and wiring diagrams. This should help any of us that do our own work, new and for pulling/replacement/repair issues.
It's now on my iBooks for reference.
Mark Fick

Novice Typer
Novice Typer
Posts: 16
Joined: Wed Nov 30, 2011 8:00 pm
PostPosted: Sat Jan 13, 2018 12:19 am
brichardson wrote:We just added engine removal and installation procedures to our Website. There are procedures for both GEN2's and GEN3's. The procedures include a detailed process and a simple listing of the process steps. Feel free to give us input or make recommendations if you have any. Click on the link below to get you to the .pdf document.

https://bruce-richardson-qu6e.squarespa ... nfig/pages

Bruce @ http://www.accelracetek.com



Very nice set of instructions!!! I will be using these in the next few weeks, thanks!

Ready to Write a Book
Ready to Write a Book
Posts: 91
Joined: Fri Sep 21, 2012 10:37 am
PostPosted: Sat Feb 10, 2018 11:06 am
When I click on the link it takes me to a login screen for SquareSpace. I even tried setting up a new account but when I tried to log in it said my e-mail address was not registered. Am I doing something wrong or just need to give the site time to recognize the new account?

Ready to Write a Book
Ready to Write a Book
Posts: 83
Joined: Thu Jul 25, 2013 10:52 pm
PostPosted: Sun Feb 11, 2018 3:34 pm
Use this link

https://bruce-richardson-qu6e.squarespace.com

Return to Spec Racer Gen3

Who is online

Users browsing this forum: No registered users and 1 guest


cron