GEN3 Progress / Laguna Report

Check out the latest version of the Spec Racer! LBoth ligher weight and more powerful!!! Available soon, racing in 2015!
User avatar
Ready to Write a Book
Ready to Write a Book
Posts: 80
Joined: Tue Dec 06, 2011 9:54 am
Location: Conway, NH
PostPosted: Wed Apr 02, 2014 10:14 am
Mike: Does the Flat Out Car have the 385 or 362 ratio?
User avatar
Needs a Life!!!
Needs a Life!!!
Posts: 348
Joined: Thu Feb 23, 2012 3:35 pm
Location: Ohio
Chassis:
244
PostPosted: Wed Apr 02, 2014 10:32 am
Mike Davies isnt' discussing his new power steering in that Gen 3 car! Nice run Mike! Sounds impressive!
Mark Fick
I'm pretty confident my last words will be 'well shit that didn't work'

Needs a Life!!!
Needs a Life!!!
Posts: 253
Joined: Wed Nov 30, 2011 1:09 pm
Location: Off Agro Racing
Chassis:
407
PostPosted: Wed Apr 02, 2014 10:59 am
From watching the video I would say it has the 3.62 R&P. Mike is in one gear lower than a 1.9 car would be in and shifts into 4th much later.
User avatar
Former Specracer National Champion
Former Specracer National Champion
Posts: 92
Joined: Fri Jun 08, 2012 5:42 pm
Location: Denver, Co.
Chassis:
247-1
PostPosted: Wed Apr 02, 2014 12:09 pm
The Flatout car has a 3.85, Mike Smiths car is a 3.62. I will post some video following him later.
My seat of the pants opinion, 3.62 was better @ T11 & Corkscrew because 2ed was taller. Mid-range in the power at 40 / 45 MPH
The 3.85 was better @ T5 & T6 because 3rd was shorter, better for climbing the hill. Mid-range in the power @ 75 / 80 MPH
With all the traffic it's hard to say if one or the other would defiantly produce a better lap time or not.

The thing everyone needs to keep in mind is the 1.6 makes within 5 ft. lb. of peak torque 2600 rpm to 6400 rpm. It’s really flat and flexible…I will say from the seat it feels better revving it up. I really like the sound of the 1.6...may not be the best for lap times.
It’s going to be really close either way, the only way to know for sure would be to put 2 of our very top racers in one of each and let them heads up race…it’s that close.
Also the Flatout car has Motec, Mike Smith car an AIM so an apple to apple overlay of wheel speed traces is pretty tuff. I might be able to put something together.
Mike Davies
SCCA Enterprises
Previous

Return to Spec Racer Gen3

Who is online

Users browsing this forum: Google [Bot] and 11 guests