AIM Gauge with GEN3

Check out the latest version of the Spec Racer! LBoth ligher weight and more powerful!!! Available soon, racing in 2015!

Needs a Life!!!
Needs a Life!!!
Posts: 200
Joined: Sat Nov 24, 2012 7:38 pm
PostPosted: Wed Sep 09, 2015 7:14 pm
Does anyone know if the serial data cable is needed to connect a AIM gauge to the ECU?

Still Learning to Type
Still Learning to Type
Posts: 32
Joined: Mon Sep 30, 2013 8:54 pm
PostPosted: Thu Sep 10, 2015 12:53 am
The Gen3 ECU communicates over the CAN bus. Most AiM products can accept the CAN data, so you don't need any extra sensors to get RPM, Throttle, Water & Oil Temp, Oil & Fuel Pressure, ECU battery voltage and Lambda.

Our company (Veracity Racing Data) can terminate your existing CAN cable for an Evo4, MXL, or MXL2/MXS, or sell you a new cable already terminated, or just a pigtail for you to attach.

Give us a call at 805.238.1699, or visit our website http://veracitydata.com

This thread details some of details of getting this working:

viewtopic.php?f=13&t=1470

Return to Spec Racer Gen3

Who is online

Users browsing this forum: No registered users and 13 guests


cron