Page 1 of 1
Gen3 Torque Chart?
Posted:
Tue Feb 28, 2017 1:51 pm
by cblough
Question:
Is there a baseline torque/dyno chart for the gen3 out there somewhere? I don't mean a specific engine, I'm just looking for a torque/hp/rpm chart so that I can put together context-sensitive shift lights for my dash.
Re: Gen3 Torque Chart?
Posted:
Tue Feb 28, 2017 2:09 pm
by Bill Parenteau
I think it is safe to say set the last light 100 rpms from the rev limit in all gears and go backwards from there.
Re: Gen3 Torque Chart?
Posted:
Tue Feb 28, 2017 3:49 pm
by Zealous
This is what is in the Gen3 conversion manual:
Optimum operation ranges
HP peak: 6100 / 6300 rpm
Torque peak: 4900 / 5100 rpm (- 6 Ft-lb from peak range 2800 / 6100 rpm)
Lug limit:4000 / 4200 rpm
Rev limiter:6750 rpm
Re: Gen3 Torque Chart?
Posted:
Tue Feb 28, 2017 5:11 pm
by breton
In my dyno tests, the HP peak appears to be well past the rev limiter (6,750). 100-150 rpm below the rev limiter will generally keep you off the rev limiter, which is desirable, since it takes about a 200 rpm drop to get off the rev limiter if it does kick in.
Re: Gen3 Torque Chart?
Posted:
Wed Mar 01, 2017 10:53 am
by peterjank
I set my first light at 6400 and my last two lights at 6650. Seems to be just enough to keep me off the rev limiter.