Wiring Diagram?

Check out the latest version of the Spec Racer! LBoth ligher weight and more powerful!!! Available soon, racing in 2015!
User avatar
Forum Hermit
Forum Hermit
Posts: 173
Joined: Mon Dec 05, 2011 1:06 pm
Location: Houston TX
Chassis:
741
PostPosted: Sat Oct 14, 2017 8:10 pm
Is there a wiring diagram for the Gen3 online somewhere? If so, can someone point me to it?

Thanks,
Ed

Ready to Write a Book
Ready to Write a Book
Posts: 64
Joined: Wed Oct 07, 2015 8:44 am
PostPosted: Sun Oct 15, 2017 3:47 pm
I've been using this one.

http://www.accelracetek.com/schematics/
User avatar
Forum Hermit
Forum Hermit
Posts: 173
Joined: Mon Dec 05, 2011 1:06 pm
Location: Houston TX
Chassis:
741
PostPosted: Mon Oct 16, 2017 4:03 pm
Jisu Kim wrote:I've been using this one.

http://www.accelracetek.com/schematics/


Thanks; I was hoping for one that included the fuel pump and its associated wiring.

Forum Hermit
Forum Hermit
Posts: 100
Joined: Fri Sep 21, 2012 10:37 am
PostPosted: Wed Oct 18, 2017 6:13 pm
There is a list of the connections and pictures of the harness connectors for the power distribution harness in Appendix G of the GEN3 conversion manual. This may be of some help. The wiring directions for the in-cell fuel pump came with the pump conversion kit. If you don't have that, let me know and I can scan it and e-mail it to you. I'm sure you can also get it from Mike Davies or Nikki LaRue.
User avatar
Forum Hermit
Forum Hermit
Posts: 173
Joined: Mon Dec 05, 2011 1:06 pm
Location: Houston TX
Chassis:
741
PostPosted: Wed Oct 18, 2017 8:29 pm
Thanks! I'll talk to Enterprises.
User avatar
Ready to Write a Book
Ready to Write a Book
Posts: 57
Joined: Sun Jul 06, 2014 11:14 pm
Location: Los Gatos, California
Chassis:
281
Facebook Page:
https://www.facebook.com/Accelracetek-285423508982
PostPosted: Sun Dec 10, 2017 1:40 pm
We just updated the website to include additional information on the GEN3 wiring. We now have connector pin-outs, schematics, and photos of the harness. Hope this helps. For the site go to www.accelracetek.com, go to the "Tech" pull down menu, and the select "Schematic".
User avatar
Forum Hermit
Forum Hermit
Posts: 173
Joined: Mon Dec 05, 2011 1:06 pm
Location: Houston TX
Chassis:
741
PostPosted: Sun Dec 10, 2017 2:27 pm
brichardson wrote:We just updated the website to include additional information on the GEN3 wiring. We now have connector pin-outs, schematics, and photos of the harness. Hope this helps. For the site go to http://www.accelracetek.com, go to the "Tech" pull down menu, and the select "Schematic".


Thanks! That will be a great resource. My fuel pump fuse was blowing. Sometimes virtually immediately, but sometimes at various, seemingly random, intervals. After tracing every possible wire, I guessed that it was either the pump itself or something internal to the main wiring harness. My CSR replaced the pump and all is well now. I want to cut-open the old pump to see if there's a "smoking gun", but I haven't got to it yet.

Ed

Return to Spec Racer Gen3

Who is online

Users browsing this forum: No registered users and 8 guests


cron