Replacement for my CDS dash- looking for help

All things specracer!

Ready to Write a Book
Ready to Write a Book
Posts: 92
Joined: Thu Jul 25, 2013 10:52 pm
PostPosted: Mon Sep 07, 2020 1:52 pm
It is time to replace my CDS Co-Pilot 2 with a new and supported dash. Where do I get the AIM dash that I see on a lot of cars? I want to track mapping and predictive lap times.
I am located in Cinicinnati OH.
The CDS works and will be available after I install the new dash. I have all the original paperwork, manual and install disk for the CDS.
Thanks
Bob Krumdieck
SRF 3 #46
User avatar
Needs a Life!!!
Needs a Life!!!
Posts: 338
Joined: Thu Feb 23, 2012 3:35 pm
Location: Ohio
Chassis:
244
PostPosted: Mon Sep 07, 2020 2:07 pm
Hi Bob! Great to chat with you yesterday at MidOhio. I got mine at Veracity Racing Data out of CA in 2016, but Al at Alliance is well versed in the Aim systems Alliance and is a dealer for Aim especially since CDS is no longer supported. Call Scott Rettich for details. I can give you advice over the phone what I have also. Alliance would install and instruct you as needed. Good luck!
Mark Fick

Ready to Write a Book
Ready to Write a Book
Posts: 92
Joined: Thu Jul 25, 2013 10:52 pm
PostPosted: Mon Sep 07, 2020 3:11 pm
Thanks,
Will do.
Bob K

Ready to Write a Book
Ready to Write a Book
Posts: 51
Joined: Sat Dec 03, 2011 8:47 am
PostPosted: Tue Sep 08, 2020 9:32 am
I would also encourage to contact Al and Scott at Alliance. I believe Al constructs a harness that makes the system work better with the Gen 3. Larry Morris

Ready to Write a Book
Ready to Write a Book
Posts: 95
Joined: Thu Dec 01, 2011 4:45 pm
Location: Oregon
Chassis:
404
PostPosted: Sat Sep 26, 2020 9:33 pm
I would suggest the AIM SmartyCam HP2.2 along with the data logger / dash you select. Be sure to add Brake sensors and steering seniors. These will really help in driver analysis. If you have CDS brake and steering, Veracity can help with the connection of CDS sensors to the AIM.
Why
RS3 Beta is available to preview. This new version from AIM will allow you to view SMC, Google Earth, and the AIM track map all at the same time and is sync'd plus the measures graph.
Goto: AIM motorsports.com

AIM has been holding webinars every Tuesday & Thursday at 10AM Pacific coast time and 1PM Eastern. There are over a 100+ webinars plus all the other you tube programs a available to view.
Oh, these webinars are going to continue to the end of 2020 at least. Playback is usually available a couple hours later.
Goto "AIM Learnfast" in You Tube.
https://mail.google.com/mail/u/0/?tab=r ... mhgBKFDfss

Ready to Write a Book
Ready to Write a Book
Posts: 92
Joined: Thu Jul 25, 2013 10:52 pm
PostPosted: Wed Sep 30, 2020 9:11 pm
I have ordered a MXL2 from Alliance. thanks for everyone advice. Hope to see you all at Mid-Ohio in October and next year.
Now does anyone want to share a 1:37 lap data download with me?
Later
Bob Krumdieck
SRF # 46
User avatar
Novice Typer
Novice Typer
Posts: 15
Joined: Tue Mar 28, 2017 8:57 pm
Location: Maplewood
PostPosted: Tue Oct 13, 2020 8:24 pm
Hi Bob,

I went to mid Ohio and somehow managed a 1:37 on Sunday. I can send you the data if you want to send me your email address. BTW awesome track and great people at Mid Ohio. Totally worth the long drive.
svenmueller_77

Return to General Discussions

Who is online

Users browsing this forum: phantomjock and 12 guests