SRF3 Chassis 492 w/ tons of spares

The best place to buy and sell anything related to Spec Racer Fords
User avatar
Ready to Write a Book
Ready to Write a Book
Posts: 97
Joined: Sun Dec 04, 2011 6:46 pm
Location: Windham, NH
PostPosted: Wed Apr 07, 2021 8:23 pm
SRF3 For Sale (Chassis #492):
Well, I never thought this day would come. I have had this car since 1999, started my w2w career with it, and have many memories. It is chassis #492, has been all over the country (job moves), and has never been in the big wreck. I have all of the history since 1999, and invoices for everything. It has been maintained by me or Motion Dynamics since 2005 (Shawn can vouch for the car). It was converted to Gen3 at end of 2014. The car is very fast, having had recent track records (as a Gen3) at NHMS, Thompson, Palmer, and Pocono (still there), with a driver that is 100lbs over minimum. Engine is strong, and Transmission was just redone by Motion Dynamics. Many victories, and Regional/Divisional championships. Car has been very reliable, less than 5 unexpected failures over the last 22 years, as I can recall. Frame is very straight, last corner balance was within 2lbs. I have many spares as well, see all info below:
• Bodywork is at minimum (panels on the car) – front could use small lower fiberglass enforcement
• New Wilwood brakes (2019)
• New belts in 2020 (expire after 2024)
• New radiator in 2020
• Trans refresh (2020) (3 weekends) – straight cut, most recent gears
• New latest clutch (2020), new pressure plate (2020)
• New fuel bladder (2020) with new hose, filter sock, filter, etc
• $900 in parts/service credit at your CSR
• Various new boots, axles (short and long), cv joints, clevis, rod ends over last 1-2 years
• 1 complete/painted to match set of front and rear body panels
• 1 fiberglass corner for easy repair
• 2 sets of weld wheels (no issues with balance/damage) – dry tires
• 1 set of ‘red’ Shelby wheels – dry tires
• 1 set of steel wheels – rain tires
• 1 extra weld rear
• 1 extra steel wheel
• 2 extra ‘test day’ dry tires
• Quick Jack (PBS?)
• Alignment bars (I will miss these with the new car)
• Heavy duty SRF fitted cover – very nice
• Full LCA with new hubs/bearings (x2)
- New rebuilt LCA/hubs/bearings on 2 corners last year
• Brake Bias
• Relatively new Momo suede steering wheel
• Fat boy fiberglass seat
• Redline Gear oil for Trans x3
• Fuel injection pump tester
• Various front aluminum pieces
• Various rod ends/bolts/pins
• Old starter, Old Koni’s x4, old brakes/calipers x4
• Track tire pressure data/info for many tracks in the Midwest and East Coast

Many pics at this link: ... 2435261797

Price is $37K for everything. Car is located in southern NH (03087). PM me on Facebook or email me sintrone (at) for more info. Thanks.
Steve Introne
NER #12
Nat F&C

Return to Advertising

Who is online

Users browsing this forum: No registered users and 1 guest