GEN3 Complete "Ready to Race" Package

The best place to buy and sell anything related to Spec Racer Fords
User avatar
Forum Hermit
Forum Hermit
Posts: 196
Joined: Tue Nov 29, 2011 10:14 pm
Location: Black Forest, CO
Chassis:
460
PostPosted: Mon Sep 04, 2017 10:55 am
Available after Indy Runoffs. Prefer to sell as a package, but will sell car separately for $37k. Will not sell Alignment gear and trailer separately until car is sold. Full package purchase can include delivery up to 750 miles from Colorado Springs, CO; other delivery options negotiable. Asking $41,900 for complete package, contact me for other purchase options.

Chassis 460:
Multiple Regional and Divisional wins, Majors podiums, pole positions, track records, fastest laps as both Gen2 and Gen3
2015 Rocky Mountain Division SRF3 Championship car
Single owner since 2005, extensive maintenance records, no negative logbook entries
Frame-up rebuild at time of Gen2->Gen3 conversion in 2015
All new suspension arms, rod ends, and hardware in 2017, including tubular UCAs
Aeroquip/Steel-braided plumbing
Thermal coated headers
Brake calipers rebuilt, new master cylinders 2017
Gearbox rebuilt by Enterprises April 2017 w/ straight cut gears, new clutch May 2017
Schroth belts good thru 2021
AIM MXL2 dash
New Penskes with new springs 2016
X2 transponder with subscription active until August 2018
~15 weekends on engine (#87), leak down numbers: 1: 100:96, 2: 100:96, 3: 100:96, 4: 100:97
Fiberglass seat
2 spare noses (1 primer, 1 repaired), 1 spare tail (needs minor work)
2 1/2 sets Shelbys (2 sets front, 3 sets rear) with 2 full sets of mounted used, but usable, Hoosiers
1 set steels with 2-session Hoosier rains
PBS Quick lift, all spares and Gen3 specialty tools included

Alignment package:
15" scales (Longacre 92)
4 roll off pads (6 levelers/pad)
Original Fenske/MSR alignment bars
Bump Steer gauge configured for SRF
Camber/Caster gauge

Trailer:
20' 1998 Pace American box trailer, set up for racing
7000# capacity, steel frame, tare weight 2900#
Heavy duty 2 5/8" weight distributing hitch with bars and sway control
Bearings and brakes serviced March 2017

If interested, message here or email to s r f 3 9 9 s c c a AT g mail
Attachments
srf399-02.jpg
srf399-02.jpg (85.9 KiB) Viewed 363 times
SRF399-01.jpg
SRF399-01.jpg (77.03 KiB) Viewed 363 times
SRF399.jpg
SRF399.jpg (76.68 KiB) Viewed 392 times
Last edited by srf99 on Tue Sep 05, 2017 12:20 pm, edited 3 times in total.
Dan
Teamwork Motorsports #99
Chassis #460
User avatar
Forum Hermit
Forum Hermit
Posts: 124
Joined: Fri Dec 30, 2011 6:29 pm
PostPosted: Mon Sep 04, 2017 11:28 am
This is nice fast car! I have racecar envy for it...Not junk.

I am looking for a second car as soon as the P2 sells so someone should move fast.

Good luck with sale Dan - and if you want to swap for a P2 I am all over it.

JM
User avatar
Forum Hermit
Forum Hermit
Posts: 196
Joined: Tue Nov 29, 2011 10:14 pm
Location: Black Forest, CO
Chassis:
460
PostPosted: Mon Sep 04, 2017 12:10 pm
Additional pics
Attachments
srf399-05.jpg
srf399-05.jpg (115.47 KiB) Viewed 362 times
srf399-04.jpg
srf399-04.jpg (111.15 KiB) Viewed 362 times
srf399-03.jpg
srf399-03.jpg (110.98 KiB) Viewed 362 times
Dan
Teamwork Motorsports #99
Chassis #460
User avatar
Forum Hermit
Forum Hermit
Posts: 196
Joined: Tue Nov 29, 2011 10:14 pm
Location: Black Forest, CO
Chassis:
460
PostPosted: Mon Sep 04, 2017 1:02 pm
Thanks Jay!
Dan
Teamwork Motorsports #99
Chassis #460

Return to Advertising

Who is online

Users browsing this forum: No registered users and 2 guests