So, for those of you who have not seen all the extensions, here is a Butler Seat with the head, shoulder and leg extensions installed.
DaveP
The Complete Butler Seat
20 posts
• Page 1 of 2 • 1, 2
![]() Needs a Life!!! ![]()
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm Location: Monument, CO Chassis: 540 |
|
![]() Needs a Life!!! ![]()
Posts: 1200
Joined: Wed Nov 30, 2011 1:38 am Location: Sunnyvale, CA Chassis: 068 415 Facebook Page: http://facebook.com/HSERacing |
Cool, I made that post a sticky.
Do you have the 6pt. harness option on it? Dave Dave Harriman
"It looks crazy, I understand. But, we only live once and I am going to give it a good try." - Alex Zanardi |
![]() Needs a Life!!! ![]()
Posts: 1200
Joined: Wed Nov 30, 2011 1:38 am Location: Sunnyvale, CA Chassis: 068 415 Facebook Page: http://facebook.com/HSERacing |
BTW, can you get it in the car?
![]() Dave Harriman
"It looks crazy, I understand. But, we only live once and I am going to give it a good try." - Alex Zanardi |
Nice, thanks. I am considering a Butler, using the fiberglass now. QQQ: Does the Butler seat sit the same hight and distance from the firewall? I am tall and don't want to sit any higher or closer to the pedals?
Thanks Joel |
|
![]() Needs a Life!!! ![]()
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm Location: Monument, CO Chassis: 540 |
Thanks Dave!
I have a Schroth six point belts that goes through the bottom of the seat to the frame. I have to replace the belts next year, and I think I will go with the Schroth 6 point that goes under your cheeks and attaches to the seat. To get the seat in the car, I have to remove the leg extensions. I was not able to get the shoulder extensions under the roll bar otherwise. For Joel, when I put the Butler in, I felt I was sitting at about the same height and I was 6 feet tall. I am a little older now ![]() DaveP |
![]() Needs a Life!!! ![]()
Posts: 766
Joined: Wed Nov 30, 2011 1:03 am Chassis: 098 Facebook Page: http://www.facebook.com/#!/denny.stripling ![]() |
Butlers sit me well higher and in a more angled position, imo (I'm 6'1"). A couple of cars I've driven with Butlers had limitations on moving the dash forward and I brutalized my kneecaps whenever I went to the pedals.
That being said, the right fitting Butler is a nice feeling piece. Denny ____________
Bay 12, please. |
![]() Needs a Life!!! ![]()
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm Location: Monument, CO Chassis: 540 |
I used mine in an Enduro right after installation. I was amazed how much more relaxed I was and how much less tired I was after the race. With the fiber glass seat, I was always bracing myself between the dead pedal and the right rear corner of the FG seat. I also got a better feel in the seat of my pants as to what the car was doing.
DaveP |
![]() Needs a Life!!! ![]()
Posts: 1200
Joined: Wed Nov 30, 2011 1:38 am Location: Sunnyvale, CA Chassis: 068 415 Facebook Page: http://facebook.com/HSERacing |
A lot depends on whether your height is in your body or legs. I am mostly legs and IIRC, Joel, you are more body. The Butlers I've used slide your butt more forward, and slightly higher off the floor, which results in the situation Denny refers to for guys like me. But it might get your head down a little bit, Joel.
I was surprised to see the official 6 pt mounting. Brought to mind the "Princess and the Pea" story. (Maybe the fact that I bring it up before drivers try it has something to do with nobody complaining, yet ![]() Dave Harriman
"It looks crazy, I understand. But, we only live once and I am going to give it a good try." - Alex Zanardi |
![]() Needs a Life!!! ![]()
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm Location: Monument, CO Chassis: 540 |
Dave,
When you say the "official 6 point mounting", do you mean Butler's option for the two mounting points on the bottom of the seat under our cheeks? DaveP |
![]() Needs a Life!!! ![]()
Posts: 1200
Joined: Wed Nov 30, 2011 1:38 am Location: Sunnyvale, CA Chassis: 068 415 Facebook Page: http://facebook.com/HSERacing |
Yes. They turn out to be slightly in front of most people's "cheeks".
Dave Harriman
"It looks crazy, I understand. But, we only live once and I am going to give it a good try." - Alex Zanardi |
20 posts
• Page 1 of 2 • 1, 2
Return to Technical and Repair Discussions
Who is online
Users browsing this forum: No registered users and 6 guests