Oil Cooler Duct Work

Technical and Repair Discussions

Needs a Life!!!
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm
Location: Monument, CO
Chassis:
540
PostPosted: Wed Mar 04, 2015 11:14 am
I believe it is 480505 OIL COOLER EXHAUST PANEL $43.03. This is off the Enterprise parts list dated January 2014.

DaveP
User avatar
Ready to Write a Book
Ready to Write a Book
Posts: 92
Joined: Wed Aug 28, 2013 6:29 pm

Chassis:
00363
PostPosted: Wed Mar 04, 2015 8:58 pm
My car is set up as Dave described. Behind the oil cooler is an uncut aluminum panel with a few spacers along the bottom edge. The spacers create a gap to the underside of the car.

Forum Hermit
Forum Hermit
Posts: 102
Joined: Mon Dec 12, 2011 1:10 pm
Location: Huntsville, AL
PostPosted: Mon Mar 09, 2015 5:27 pm
kurtbob wrote:My panel is wire mesh also, just like shown in the photo.


Mine too.

Never saw any reference to an update in the Enterprise Tech Bulitins either. And I when back and read all the ones availible on line after getting the car.
Bruce Funderburg
SEDiv SRF #4

Still Learning to Type
Still Learning to Type
Posts: 36
Joined: Thu Aug 06, 2015 7:53 am
Location: Bloomington, MN
Chassis:
513
PostPosted: Thu Apr 14, 2016 4:28 pm
After reading this thread I thought I might post a new question here. The SRF I recently bought has no hose from the NACA duct or any duct work around the cooler. From an image I saw in the RFSRII, it looks like there is some kind of funnel like duct over the cooler. Do I need to run these to be legal? Do I need these for the engine to run well/survive?

Jim
Previous

Return to Technical and Repair Discussions

Who is online

Users browsing this forum: No registered users and 12 guests


cron