I finally put down the coin to get a new rear body section (and get rid of 17#s). I am getting ready to do the wheel cut-outs and rear panel cut-out. In the GCR, it says that you can reinforce the fiberglass around the cut-outs. Are other people doing this??
I know I want to keep the weight down, but the fiberglass is so thin on the new body, it seems like it needs some extra support around the required cut-outs.
Thanks, DaveP
New Rear Body Reinforcement
4 posts
• Page 1 of 1
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm Location: Monument, CO Chassis: 540 |
|
Needs a Life!!!
Posts: 260
Joined: Wed Feb 08, 2012 8:45 pm Location: Daytona Beach, FL |
I just do the cut outs and let it go. Seems fine to me.
|
We at comprent fabricate an arch reinforcement. They sell for $65.00 a pair. Call us at 706 543-1797 Ext. 1 if you are interested. thanks, Kevin
|
|
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm Location: Monument, CO Chassis: 540 |
Thanks Kevin. I will call.
DaveP |
4 posts
• Page 1 of 1
Return to Technical and Repair Discussions
Who is online
Users browsing this forum: No registered users and 15 guests