Master Cylinder Output Size/Thread pitch
Posted:
Mon Feb 22, 2016 9:59 am
by cblough
I'm installing a brake pressure sensor between the master cylinder and the brake line, and intend to put a simple T inline with the current stainless steel braided brake line.
What size/thread pitch is the brake line that screws into master cylinder?
Re: Master Cylinder Output Size/Thread pitch
Posted:
Mon Feb 22, 2016 3:28 pm
by Ed Cavalier
Should be 3/8-24 (-3 AN)
http://www.hrpworld.com/store/default/b ... inder.htmlhttp://www.wilwood.com/Images/MasterCyl ... dwg-lg.jpgWhen I added brake pressure transducers, I used the following parts from Pegasus:
3223 Steel 1/8 NPT Female Tee
3250-02-03S 1/8 NPT Male - 3AN Male Steel Adapter
3253-02-03S 1/8 NPT Male - 3AN Steel 90' Elbow
3278-03 Aluminum Crush Washer, 3/8 ID pkg of 5
Re: Master Cylinder Output Size/Thread pitch
Posted:
Wed Feb 24, 2016 9:37 pm
by cblough
Great, thanks a bunch! This is exactly what I needed.