Re: Gen 3 won't start
Posted: Thu Mar 15, 2018 8:55 pm
Exactly the same problems as my car!
I've found now that if I do very short hits on the starter it tends to start, yes seems like the engine wont fire while the starter is under load. It's like the flywheel momentum is necessar for the engine to start.
I've done trigger sync scans on the PE monitor and it shows no crank trigger, yet the plugs are firing and the injectors are working.....makes so sense at all. endless continuous cranking and it will not start.
I sorted out my ECU light connections as the wires 4 and 5 were swapped in the six pin connector. now my map light doesn't work. maybe 3 and 4 are swapped. I message you later thanks' Glenn
I've found now that if I do very short hits on the starter it tends to start, yes seems like the engine wont fire while the starter is under load. It's like the flywheel momentum is necessar for the engine to start.
I've done trigger sync scans on the PE monitor and it shows no crank trigger, yet the plugs are firing and the injectors are working.....makes so sense at all. endless continuous cranking and it will not start.
I sorted out my ECU light connections as the wires 4 and 5 were swapped in the six pin connector. now my map light doesn't work. maybe 3 and 4 are swapped. I message you later thanks' Glenn