Page 1 of 1
moog lower ball joint part number
![Post Post](./styles/absolution/imageset/icon_post_target.gif)
Posted:
Wed Aug 14, 2013 8:05 pm
by CRH002
Anyone have the Moog part number for the lower ball joint on the front suspension?
I need to rebuild the right front corner.
I found the upper ball joint part number here.
viewtopic.php?f=5&t=151Thanks!
Re: moog lower ball joint part number
![Post Post](./styles/absolution/imageset/icon_post_target.gif)
Posted:
Sat Aug 17, 2013 7:24 am
by CRH002
Anybody? Any help is appreciated.
Re: moog lower ball joint part number
![Post Post](./styles/absolution/imageset/icon_post_target.gif)
Posted:
Sat Aug 17, 2013 4:23 pm
by M.Hausknecht
There is no lower ball joint, perhaps the reason on one has answered. There is a hardened steel pin you get from your favorite CSR, used with a male, right hand thread #10 rod end.
Michael Hausknecht (NE#60)
Re: moog lower ball joint part number
![Post Post](./styles/absolution/imageset/icon_post_target.gif)
Posted:
Sat Aug 17, 2013 6:15 pm
by CRH002
Thanks. Obviously I'm new at this. Blessed for the knowledge.
Thank you.
Re: moog lower ball joint part number
![Post Post](./styles/absolution/imageset/icon_post_target.gif)
Posted:
Tue Aug 20, 2013 2:22 pm
by Rod
Actually Mark isn't 100% correct on this.
There used to be a lower ball joint, a looooong time ago.
And I would be scared to race on one nowadays....