GEN 2 #485 FOR SALE Near Houston, Tx

The best place to buy and sell anything related to Spec Racer Fords

New Member
New Member
Posts: 8
Joined: Wed Feb 25, 2015 3:15 pm
Location: Houston, TX
Chassis:
000485
PostPosted: Sun Apr 08, 2018 6:07 pm
Good basic car. Set up for Hoosiers. Car is straight and ready for competition. Body work is 2/3 good. Nose is rough underneath but OK on the outside.
Two weekends on:
• New adjustable fuel pressure regulator
• New vented brake rotors
• Rebuilt Master Cylinders
• Rebuilt Calipers
• New Brake Pads
• New fuel filter
• New fuel filler hose
• New tie-rod ends
• New fuel lines
• New in-cell fuel pump
• New Autometer analog Tach and gauges in a new dash
• New clutch slave cylinder
• New radiator
• New brake bias adjuster
• New fire system cable
• New oil cooler exhaust ducting
• Wired for easy charging or jump starting
• Plumbed for cell pump-out (used to measure fuel volume/usage)
Includes:
• Penske shocks
• Belts good through 2018 for SCCA
• 1 Set Shelby’s with track-day tires
• Wired for radios
• Spare Alternator
• Spare Starter
• Spare MAF meter
• Injectors were cleaned and flowed in January of 2016 by Barry Mumm
• Quick Jack
• Race-Technology DL1 data acquisition. GPS based system with arguably the best software available.
• Throttle position sensor
• 4-EGT input
• 1 Set Weld Wheels with Hoosiers
$12000

Photos:
http://s12.photobucket.com/user/Web3535 ... t=9&page=1

PM for photos of anything specific.
PM or e-mail if interested.

Return to Advertising

Who is online

Users browsing this forum: No registered users and 1 guest


cron