EGT?

Technical and Repair Discussions
User avatar
Novice Typer
Novice Typer
Posts: 20
Joined: Wed Oct 07, 2020 3:03 pm
Location: Pueblo West Colorado
Chassis:
634
PostPosted: Fri Oct 16, 2020 1:50 pm
Are we allowed to run an Exhaust Gas Temp probe on the Header at the Cyl. Head?
Doug

Forum Hermit
Forum Hermit
Posts: 108
Joined: Thu Dec 01, 2011 4:45 pm
Location: Oregon
Chassis:
404
PostPosted: Sat Oct 17, 2020 1:37 am
Doug, I have seen several cars with heat strips hose clamped to each header very close the header flange/head.
User avatar
Novice Typer
Novice Typer
Posts: 20
Joined: Wed Oct 07, 2020 3:03 pm
Location: Pueblo West Colorado
Chassis:
634
PostPosted: Mon Oct 19, 2020 1:48 pm
Thank you.
Doug

Still Learning to Type
Still Learning to Type
Posts: 28
Joined: Wed Oct 07, 2015 8:44 am
PostPosted: Mon Oct 19, 2020 5:00 pm
John Hagerman fixed up a header with bungs for four EGT probes. You might want to check with him to see if it was worthwhile.
User avatar
Novice Typer
Novice Typer
Posts: 20
Joined: Wed Oct 07, 2020 3:03 pm
Location: Pueblo West Colorado
Chassis:
634
PostPosted: Mon Oct 19, 2020 6:56 pm
Thank you... that is what I was looking for. ;)

Return to Technical and Repair Discussions

Who is online

Users browsing this forum: No registered users and 1 guest