I am looking to fit a UTV or Golf Cart in my trailer with the race car. I only have 80" to spare. Most UTV and carts need 84-90+.
Alone seen or dealt with this situation? I figure I will have to jack one end up a foot and build a stand, so the nose of the srf will fit underneath.
I wondered if anyone had a more ingenious solution....
Trailers and fitting a UTV/Cart. Ideas requested
3 posts
• Page 1 of 1
Scott Cypher
SRF3 #577 G3 |
|
put it sideways...
Bob Breton - SRF 51 - San Francisco Region
|
|
Forum Hermit
Posts: 136
Joined: Thu Dec 01, 2011 4:45 pm Location: Oregon Chassis: 404 |
Scott,
Todd Butler has/had a trailer which he made a winch system with ramps. His 24'/27' trailer could carry 2 SRF's. Another idea I have seen is to make ramps on each side and then use a winch to pull your SRF up the ramps far enough to clear the golf cart. I saw that idea when we were racing stock cars. We have a 27' trailer with a work bench at the front. We are still able load the golf cart nose in forward facing and back in the SRF, leaving us about 6-8" to spare. Oh I have several additional ideas on how to raise the SRF but I am sure you have talked with others and now which plan works best for you. Have Fun |
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests