1. Purchase Price: The purchase price for the Conversion Kit shall be:
Price for Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . $ 10,995.00
Shipping and Delivery Charge (FOB Colorado) . . . . . . . . . . . $ Invoiced At Delivery
(Not to Exceed $400, March 2014 Shipping Rates*)
State and Local Taxes . . . . . . . . . . . . . . . . . . . . . . . . $ ________________
Total Delivered Price for Conversion Kit . . . . . . . . . . . . . $
(A convenience fee of 3% will be added to each credit card payment)
====================================== ===============================
2. Optional items purchased* with Kit (circle dollar amount if desired and total at bottom):
New Coolant Overflow Tank (weld on fittings included with kit) . . $ 214.30
New Bent Shift Shaft (template to bend your own in kit) . . . . . $ 77.10
Serial Data Converter (for some data systems compatibility) . . $ 225.00
If one is using the AIM system, does one need the Serial Data Converter?
3 12 14 Invoice questions
22 posts
• Page 1 of 3 • 1, 2, 3
AIM should work off Can-bus, so serial interface should not be required.
Bob Breton - SRF 51 - San Francisco Region
|
|
Thanks Bob!
|
|
Correct. The last time I checked the ecu chosen was supported by aim and works over the canbus. I don't believe it has changed.
http://www.aim-sportline.com/eng/downlo ... ctions.htm It was one of the aem ecus correct? Click on the correct ecu and it will show you how to connect to the can lines. Joe Cooley
Circuit Motorsports |
|
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm Location: Monument, CO Chassis: 540 |
Joe,
Do you know if the Traqmate system will hook up to the new ECU? DaveP |
Traqmate does not have an ecu connection so you'd have to use regular sensors to get data. The best deal for getting data from the ecu is an AIM solo dl for 699. They have been my best seller for track day and racers for the last couple of years. Joe Cooley
Circuit Motorsports |
|
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm Location: Monument, CO Chassis: 540 |
Thanks Joe. I didn't think it would connect up, but thought I would ask.
DaveP |
Cooley is correct Dave. I was at the Expo in Charlotte and talked with the Traqmate guys who were very nice, but they have no direct way to connect to the new ECU on the Gen 3. All sensors for their systems are separate. It seems the Solo packages at the show were the most reasonable units and since Competition Data was not there I couldn't ask them any detailed questions, but they responded to me by email and directed me to their Gen 3 website:
http://www.competitiondata.com/download ... _flyer.pdf Hope that helps! Mark Fick
I'm pretty confident my last words will be 'well shit that didn't work' |
|
Thanks for the plug Mark, and as I mentioned in our emails, feel free to contact me by email, phone, or on the forum here with any questions you might have about our system and its integration with the PE ECU on the GEN3.
We will be connecting via the CAN interface on GEN3 production kits so the serial converter is not needed by our customers. Full product details are at http://www.competitiondata.com -Peter Kelly |
|
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm Location: Monument, CO Chassis: 540 |
Thanks for the info, guys. I will look it over.
DaveP |
22 posts
• Page 1 of 3 • 1, 2, 3
Who is online
Users browsing this forum: No registered users and 41 guests