Is there a wiring diagram for the Gen3 online somewhere? If so, can someone point me to it?
Thanks,
Ed
Wiring Diagram?
7 posts
• Page 1 of 1
Thanks; I was hoping for one that included the fuel pump and its associated wiring. |
|
There is a list of the connections and pictures of the harness connectors for the power distribution harness in Appendix G of the GEN3 conversion manual. This may be of some help. The wiring directions for the in-cell fuel pump came with the pump conversion kit. If you don't have that, let me know and I can scan it and e-mail it to you. I'm sure you can also get it from Mike Davies or Nikki LaRue.
|
|
Thanks! I'll talk to Enterprises.
|
|
Ready to Write a Book
Posts: 57
Joined: Sun Jul 06, 2014 11:14 pm Location: Los Gatos, California Chassis: 281 Facebook Page: https://www.facebook.com/Accelracetek-285423508982 |
We just updated the website to include additional information on the GEN3 wiring. We now have connector pin-outs, schematics, and photos of the harness. Hope this helps. For the site go to www.accelracetek.com, go to the "Tech" pull down menu, and the select "Schematic".
|
Thanks! That will be a great resource. My fuel pump fuse was blowing. Sometimes virtually immediately, but sometimes at various, seemingly random, intervals. After tracing every possible wire, I guessed that it was either the pump itself or something internal to the main wiring harness. My CSR replaced the pump and all is well now. I want to cut-open the old pump to see if there's a "smoking gun", but I haven't got to it yet. Ed |
|
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 8 guests