Fuel pressure sender question
3 posts
• Page 1 of 1
Forum Hermit
Posts: 128
Joined: Thu Dec 01, 2011 8:35 pm Location: Hebron, CT Chassis: 008 Facebook Page: https://www.facebook.com/profile.php?id=1032406508 |
Question for those of you recording fuel pressure to your data systems: What are you using for a fuel pressure sender? I've seen the VDO units being sold as fuel P senders, but the VDO site clearly states their senders are NOT to be used with fuel. I would preferably like to use a 0-150 psi unit with the same calibration curve as my Oil P sender.
Les Kurz
NER SRF #31 Chassis #008 (GEN2) |
Needs a Life!!!
Posts: 253
Joined: Wed Nov 30, 2011 1:09 pm Location: Off Agro Racing Chassis: 407 |
I ordered the fuel pressure sensor when I placed the order with Aim. It is a VDO unit. Here is a link to the VDO unit (P/N 360410) in my car ( http://www.summitracing.com/search?Sort ... e%20Sender )
I would be careful when selection a sensor range to make sure that it has enough sensitivity for the application. Normal data range for fuel pressure is 25 to 45 psi. A 0 to 80 psi sensor is a better match than the oil pressure unit (0 to 150 psi) you are wanting to use. |
I use an AEM fuel pressure sender with gauge.
Kurt Breitinger
SEDIV #28 Chassis 494 |
|
3 posts
• Page 1 of 1
Return to Technical and Repair Discussions
Who is online
Users browsing this forum: No registered users and 11 guests