Spare Parts at Race
9 posts
• Page 1 of 1
Ready to Write a Book
Posts: 67
Joined: Tue Nov 29, 2011 10:28 pm Location: Texas |
If a CSR was not present at a race you were attending, what spare parts would you take with you?
-Scott
|
All of the aluminum parts north of the front wheels, plenty of pop rivets, pieces of aluminum to mold over broken fiberglass and matching 200 mph tape.
|
|
If I had it, a spare pair of hubs with fresh bearings (one of each type). |
|
I basically bring every spare part I own, to every race. It takes up room in the trailer, but I have the peace of mind in case I need something. One thing I didn't have for years was a couple spare rod ends, but that is now part of my inventory.
Dan
Formerly Teamwork Motorsports #99, Chassis #460 |
|
I try to bring weird stuff like a Halon tank and an extra transponder. You need only bring extra beer when starting off in SRF. The community will provide. Dave Gills
#80 Red/Silver (chassis 504) Pittsburgh, Pa. |
|
I bring my car, and paddock near Dan. |
|
Forum Hermit
Posts: 111
Joined: Thu Mar 01, 2012 2:01 pm Location: Houston, Tx Chassis: None |
And an extra radiator...and extra A arms. If it can break, I've broken it |
Park near Matt - when he breaks his stuff there is always a few salvageable pieces!
|
|
Ready to Write a Book
Posts: 67
Joined: Tue Nov 29, 2011 10:28 pm Location: Texas |
Thanks for all the info. Based on everyone's input I am planning to bring the following to each race:
1) Duct Tape 2) Lots of premium Lager Seems like that oughta do it! -Scott
|
9 posts
• Page 1 of 1
Return to Technical and Repair Discussions
Who is online
Users browsing this forum: No registered users and 42 guests