UPDATE from Gen3 testing: Got the AIM system connected to the Gen3 in time for the open test day at Thunderhill this weekend. Note that I did have to ask Enterprises to send the other end of the ECU CAN-BUS plug as it's not provided by default in the Gen3 kit (male side). Need to add a 100-120 ohm resistor between the CAN+ and CAN- wires when you wire up the CAN-BUS plug (don't trim it too much as I nearly did as the pins need to be pushed in a quite a ways.) Thanks, Dave Ferguson, for the assist.
I immediately had all the CAN settings available from the PE3 once it powered up. I did have to fiddle with the default ranges on some of the setting provided as some of the defaults were out of range (e.g. Oil pressure maxed out at 14 psi, and Lambda was configured as psi but actually returned Lambda values (decimal value with 1.00 being equal to 14.7/1 A/F ratio). Data was captured correctly so it's only in the display that it mattered. Easy enough to set up a math channel to convert to A/F ratio if desired.
Now, if I can only figure out how to get the PE3 software to connect to the ECU!
CAN template for AIM data system
33 posts
• Page 2 of 4 • 1, 2, 3, 4
Bob Breton - SRF 51 - San Francisco Region
|
|
Needs a Life!!!
Posts: 228
Joined: Wed Dec 28, 2011 6:21 pm Location: Stillwater, Mn Chassis: 784 |
Bob - Not sure what the ECU problem is. I have had two different Windows laptops plugged into the ECU and never had a problem. Sometimes it is slow to connect but it always does.
|
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm Location: Monument, CO Chassis: 540 |
If you have firewall software on the computer, you might need to disable it to connect to the ECU (I had to).
DaveP |
I suspect it's a firewall issue since that seems to be the most common issue reported. Anyone successfully connect using Windows XP? Considering upgrading to Windows 8.1 (ugh!) but don't really want to if I don't have to, since the only reason I have Windows XP is for the AIM software. Tried both through VMWare Fusion and directly from BootCamp on a MacBook without success (both work perfectly with AIM software through a USB connection.) May try to borrow someone's PC if worse comes to worse.
Bob Breton - SRF 51 - San Francisco Region
|
|
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm Location: Monument, CO Chassis: 540 |
I am on Windows 7 on my laptop (Windows 8 sucks). You can still buy 7 for $30 online ($95 at Amazon). I would do that.
DaveP |
Needs a Life!!!
Posts: 228
Joined: Wed Dec 28, 2011 6:21 pm Location: Stillwater, Mn Chassis: 784 |
I'm on Win7 and it works
|
Needs a Life!!!
Posts: 766
Joined: Wed Nov 30, 2011 1:03 am Chassis: 098 Facebook Page: http://www.facebook.com/#!/denny.stripling |
I'm assuming the challenges with Win8.1 are around the metro (Start) screen yes?
Just get 8.1 and boot directly to desktop (Control Panel -> Taskbar and Navigation -> boot right to desktop as opposed to start screen). If you're a start menu fan, you'll still need to hit the windows key and just begin to type in what you're looking for (e.g. hit windows key to go to start screen, type "Race..." and click on RaceStudio). I recommend just putting a shortcut on the desktop. This way you can avoid the start/Metro screen all the time unless you need to search for an app. When we release Win10 next year all of this pain will go away (yes, I'm in agreement that Win8 was a miss in this regard! ). On another note, I just put an Evo4 with Gdash in my car and am looking forward to pluggin' and playin' come Gen3 time. Denny ____________
Bay 12, please. |
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm Location: Monument, CO Chassis: 540 |
Denny,
I thought you sold your car??? DaveP |
Needs a Life!!!
Posts: 511
Joined: Tue Nov 29, 2011 10:12 pm Location: Texas Chassis: 821 |
Denny couldn't be without a SRF! He bought another prior to selling the old one.
|
I plan to purchase an Aim system when I convert next year but want to purchase a MacBook Pro (for other reasons)this year. If in bootcamp , does the software work or would you advise against this plan?
|
|
33 posts
• Page 2 of 4 • 1, 2, 3, 4
Who is online
Users browsing this forum: No registered users and 3 guests