Reusable air filter
15 posts
• Page 1 of 2 • 1, 2
Checking my Gen 3 filter this weekend it's getting pretty cruddy (after several rain sessions and about 10 hours of track time). Noticed that it's described as "reusable", but no further information on the process or materials needed. This looks a lot like a K&N filter, so can I use one of their cleaning kits or is there another recommended process to clean and re-oil the filter?
Bob Breton - SRF 51 - San Francisco Region
|
|
Bob, I used to washout my K&N go kart filters with simple green and then blew them dry with an air hose. Worked great.
Bob |
|
I did as well, plus sprayed them with oil since that's what provides the finer particle filtering.
Bob Breton - SRF 51 - San Francisco Region
|
|
Was anybody able to find out more about this topic???
Dan
Formerly Teamwork Motorsports #99, Chassis #460 |
|
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm Location: Monument, CO Chassis: 540 |
Just an FYI. The K&N filter cleaning kit for my old truck warned not to use compressed air to dry it as it could damage the structure of the filter. I always left it sitting in the sun until dry before I re-oiled it.
DaveP |
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm Location: Monument, CO Chassis: 540 |
This is what it says on the Airaid website for their cleaning kits. (www,airaid.com) Note, it says oiling is not necessary with the SynthaMax® Filter. i am not sure what we have in our kits. Mike or Erik, feel free to jump in here with some advise.
DaveP Fits: This cleaning kit works with all of our premium Airaid filters. Description: Air Filter Renew Kit; 6.25oz Aerosol Oil; 12oz Cleaner; AIRAID® Cleaning Solution is uniquely formulated to clean without damaging the gauze filter media. AIRAID® Performance Oil Forms an additional line of defense against dirt without limiting airflow. Clean your AIRAID® filter every 30,000 to 50,000 miles for normal driving, or more often for off-road and heavy dust conditions. If your annual mileage is low, be sure to check the filter once a year to see if oiling is needed. • Use Only AIRAID® Cleaning Solution: • Use only AIRAID® Cleaning Solution to clean your AIRAID® filter. • Never use gasoline, detergents, steam cleaning or parts solvent. • Oil After Cleaning: *Not necessary with SynthaMax® Filter. Your AIRAID® Premium Filter is pre-oiled and ready to use right out of the package. Always oil your AIRAID® Premium Filter after each cleaning. |
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm Location: Monument, CO Chassis: 540 |
I called Airaid and talked to customer support. The filter in our kit does require oiling when cleaned. Their cleaning kits are $19.99 including cleaner and oil.
DaveP |
Thanks for the update Dave!
Dan
Formerly Teamwork Motorsports #99, Chassis #460 |
|
Needs a Life!!!
Posts: 308
Joined: Sun Dec 04, 2011 10:38 pm Location: Monument, CO Chassis: 540 |
Good customer service! I ordered a cleaning kit from AirAid early this afternoon and it already shipped (for free) 3-day Priority Mail late this afternoon. Service with a smile...
DaveP |
Ready to Write a Book
Posts: 84
Joined: Mon Sep 09, 2013 10:03 am Chassis: 469 |
I would caution against using an oiled air filter. I started using K&N filter on my Lotus Elise a few years back. Recently the car wouldn't idle. After doing some research I pulled the MAF sensor. Covered with black oily residue. Same for the IAC. Full of black oily gunk. Cleaning both seems to have fixed the problem. The only oily thing upstream of these two parts would be that K&N filter.
Scott Ross
#469 |
15 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 3 guests