Does anybody know if the SRF Gen2 ECU has a connection for a data logger and if so where I could find documentation for it?
Thanks in advance.
GEN2 ECU Connection
5 posts
• Page 1 of 1
I have no idols. I admire work, dedication, and competence - Senna
|
|
Ready to Write a Book
Posts: 57
Joined: Sun Jul 06, 2014 11:14 pm Location: Los Gatos, California Chassis: 281 Facebook Page: https://www.facebook.com/Accelracetek-285423508982 |
The only signal you can get out of the GEN2 wire harness is the tachometer signal. You will need to run separate sensors for water and oil. We have some GEN2 schematics on our website www.accelracetek.com. It is in the tech section under schematics. http://www.accelracetek.com/schematics- ... lectronics
Bruce @ AccelRaceTek |
Thank you, Bruce. I have no idols. I admire work, dedication, and competence - Senna
|
|
What system are you installing? Had a friend sell me an old Mychron3 XG Log for almost nothing. That is going to be my plan for data system for the moment.
Let me know if you have any issues or what not. Gen 2 guys need to stay together lol. Btw....don't suppose anyone know of a bracket template or way to mount a mychron 3 to the steering wheel? Chris B
Chicago Region Flagging and Communications / Emergency Services Good chance you have seen me waving flags like a crazy person at some point. |
|
I am installing a Mychron MXM which attached to the dash. I've bought a pressure sensor and a water temp sensor to replace the existing gauges. Mounting a MyChron 3 should be fairly easy. You should be able to fabricate a mount or use one from a Kart MyChron 4 or 5 like this one https://cometkartsales.com/Black-Rhino-Steering-Wheel-Gauge-Mount.html If you have a MyChron 3 Gold which has a very large cable coming out of the back you need to dash mount it. I have no idols. I admire work, dedication, and competence - Senna
|
|
5 posts
• Page 1 of 1
Return to Technical and Repair Discussions
Who is online
Users browsing this forum: No registered users and 2 guests